英语翻译以上构件请务必在底漆喷涂之前处理并达到规范要求。Above components shall beprocessed and meet the standard requirements prior to primer painting.钢板抛丸清理等级应达到Sa2.5(近白级)Steel shot blastin

来源:学生作业帮助网 编辑:作业帮 时间:2024/05/06 17:06:41
英语翻译以上构件请务必在底漆喷涂之前处理并达到规范要求。Above components shall beprocessed and meet the standard requirements prior to primer painting.钢板抛丸清理等级应达到Sa2.5(近白级)Steel shot blastin

英语翻译以上构件请务必在底漆喷涂之前处理并达到规范要求。Above components shall beprocessed and meet the standard requirements prior to primer painting.钢板抛丸清理等级应达到Sa2.5(近白级)Steel shot blastin
英语翻译
以上构件请务必在底漆喷涂之前处理并达到规范要求。Above components shall be
processed and meet the standard requirements prior to primer painting.
钢板抛丸清理等级应达到Sa2.5(近白级)
Steel shot blasting cleaning shall achieve Sa2.5(near white blast)

英语翻译以上构件请务必在底漆喷涂之前处理并达到规范要求。Above components shall beprocessed and meet the standard requirements prior to primer painting.钢板抛丸清理等级应达到Sa2.5(近白级)Steel shot blastin
第一句话,还可以了,就是above用的,我个人觉得不太恰当:
Components mentioned above shall be processed so as to meet the standard requirements prior to primer painting.
还有就是,and meet,您用的是,我觉得这个主语不同,您不能说是以上构件满足要求,而是经过处理以后的构件的表面,满足涂装的要求,这里我用了 so as to.
The surface of steel plate cleaned with shot blasting shall achieve Sa 2.5 (Near White ).
用了一个过去分词作定语;近白级,near white就可以了.

above components asks to paint before spraying in the bottom and must do it and reach the standard ask. 第二局,shall achieve 换为 should reach

说得不好,分太少,很难回答

The above components must be treated before spraying primer and meet required standards.
The steel plate shot blasting should meet the level of Sa 2.5.

[务必] 翻译为must 比shall 更贴切。
[符合规范要求] 用 comply with 更佳。
抛丸清理 - shot blast cleaning
近白级 - 不能用near ,可以用 nearly 或 close to

The above components must be processed (treated) to comply wit...

全部展开

[务必] 翻译为must 比shall 更贴切。
[符合规范要求] 用 comply with 更佳。
抛丸清理 - shot blast cleaning
近白级 - 不能用near ,可以用 nearly 或 close to

The above components must be processed (treated) to comply with the standard requiremets ptior to primer painting (spraying).

The steel shot blast cleaning shall (should) achieve Sa 2.5 (nearly white blast)

收起

All those mentioned components should be processed(这里的处理是不是应该有一个具体的动作呢?如果有的话,就不要用process了。) and meet the standardized requirement before primer spraying.
steel impact cleaning level should reach Sa 2.5 (close to white)

用我修改的吧。
===========
以上构件请务必在底漆喷涂之前处理并达到规范要求。
Please make sure the above components are processed so that they meet the standard requirements prior to primer painting.
因为有“请务必”,所以还是用"Pl...

全部展开

用我修改的吧。
===========
以上构件请务必在底漆喷涂之前处理并达到规范要求。
Please make sure the above components are processed so that they meet the standard requirements prior to primer painting.
因为有“请务必”,所以还是用"Please make sure"比较到位。
钢板抛丸清理等级应达到Sa2. 5(近白级)
The grade of stell shot blasting cleaning should achieve Sa2.5 (near the grade of white blast)
等级一词我就翻译成"the grade"了。不了解你的行业里有否别的说法。可讨论。

收起

已经不错!建议修饰一点:

  1. The above components shall be processed according to the standard requirements prior to primer (paint) spray.

  2. Steel shot blasting cleaning shall achieve Sa2. 5(near/close to white blast scale). 


底漆喷涂=primer底 paint漆 spray名词; 不是"painting".

scale=比例;尺度

according=根据; meet; comply with.

两个主要问题:1、中文“以上”的意思没有正确表达。 2、应用被动语态表达第二句。
所以整个应该改为:
1、The above mentioned components shall be
treated to comply with the standard requirements before primer painting coat processing.
2、...

全部展开

两个主要问题:1、中文“以上”的意思没有正确表达。 2、应用被动语态表达第二句。
所以整个应该改为:
1、The above mentioned components shall be
treated to comply with the standard requirements before primer painting coat processing.
2、Steel shot blast shall be achieved with Sa2. 5(near white blast)

懂工程的人不懂英语,懂英语的人不懂工程,实乃中国工程界的一大悲哀!

收起

英语翻译以上构件请务必在底漆喷涂之前处理并达到规范要求。Above components shall beprocessed and meet the standard requirements prior to primer painting.钢板抛丸清理等级应达到Sa2.5(近白级)Steel shot blastin 喷涂磷化底漆可以替代传统磷化处理工序吗? 能否在酸洗后直接进行喷涂环氧富锌底漆进行防锈处理(阳台铁栏杆,不打磨或喷吵处理) 英语翻译:请务必在离开之前把所有的窗都关好(be sure) 英语翻译裸铁除锈→旧漆膜处理→清洁除油→喷涂防锈底漆→上原子灰→研磨粗原子灰→上细原子灰→细磨原子灰→清洁→喷涂底漆→喷涂研磨指示层→烘干→细磨→上填沙眼原子灰→细磨 我想问下在铸铝上喷涂自干型双组分氟碳漆该使用哪些底漆和清漆铝材在喷涂料前该怎么处理才有良好的附着力 静电喷涂是否可以多次进行,即在底漆、中间漆喷涂后再采用静电喷涂喷面漆? 英语翻译请务必帮帮忙, 英语翻译请务必准确 英语翻译在油漆喷涂之前,构件上的飞溅,棱角,油污,残留的耦合剂等必须清理干净.The weld splatters,edges,oil stains and remaining couplant on the component shall be cleared prior to paintingprimer.防腐工作已经开始, 求大神给这幅画配一段文字介绍请务必在1点20之前回答!QAQ ABS材质的电镀面喷漆后掉漆,附着力不好,怎么处理,喷的漆有:底漆、色漆、清漆、从打磨、擦净、调漆、喷涂几方面回答一下, 静电喷涂粉末喷在构件上出现两种颜色固化后掉色为什么 请问金属粉末喷涂后,工件不合格打磨返修在喷涂喷不上粉该如何处理 什么是氟碳喷涂、粉末喷涂、木纹转印有什么区别?铝合金表面处理常见的以上几种方式, 喷涂废气怎么处理? 英语翻译请务必是正确的 英语翻译句子,请务必保证准确,